Features:
Fabricated stainless steel impellers and diffusers for corrosion resistance.
Heavy duty stainless steel structure to assure permanent alignment of all the components in order to increase run time and trouble-free operation.
Stainless steel components, nitrile rubber fluted bearing to ensure durability against wear for long-lasting constant performances and product reliability.
Built-in check valve to protect the pumps against water hammer risk
The hydraulic design is such to enhance the overall efficiency thus reducing energy consumption and making the pumping systems more cost effective
Applications:
Irrigation
Household water supply
Pressure boosting
Industrial applications
Fountains
Sprinkler system
Gardening
Rural and civil water supply
Non-aggressive, non-explosive, pure cold, fresh water without abrasive particles having the following characteristics:
PH: 6.5-8.5
Turbidity: 50 ppm silica scale Max
Viscosity: 1.75*1000000 square meters per second Max
Hardness (drinking water): 300 Max
Specific gravity: 1.004 Max
Allowable solids: 3000 ppm Max
Chlorine ion density: 500 ppm Max
Permissible amount of sand: 50g/cbm Max
Temperature: 33 C degree/NBR; 90 C degree/Viton
Pump materials:
Part material
pump body: AISI 304
Impeller: AISI 304
Diffuser: AISI 304
Delivery door: AISI 304
Suction support: AISI 304
Shaft: AISI 304
Coupling: AISI 304
Check valve: AISI 304
Bearing: wear resistance rubber
Using a floating seal ring between chambers providing a nearly perfect seal, internal leakage caused by pressure differentials within the pumps was minimized.
FAQ
Q1: Are you a factory or trading company?
A: We are a deep well submersible manufactory.
Q2: Do you have any MOQ requirements?
A: Our MOQ is a full 20ft container
For the first time cooperation, we accept trial sample order for customer checking quality
Q3: What is the delivery lead time:
A: Generally, 20-30 days after receiving deposit. For some very urgent orders, we can however, get it finished for shipment within 10 days
Q4: What is the payment terms:
A: Generally, 30% deposit T/T and balance 70% T/T against Bill of Lading copy. D/P, L/C can be negotiated.
Our Services
1. Accept OEM.
2. 1-year quality warranty from ETD with technology support
3. Promise that produce the quality products and meet the customer requirements
After sale service
1. During the warranty time can replace a new one.
2. Our engineer and sales team can visit our core agent for promotion
http://www.cnjaphethpump.com/